Bosch VIPX2 Installation And Operating Manual page 28

EN | 28
– Insert the CD in the CD-ROM drive of the computer. If the CD does not start
automatically, open the root directory of the CD in Windows Explorer and
double click MPEGAx.exe.
– Follow the on-screen instructions.
Establishing the connection
The VIP X2 must be assigned a valid IP address to operate on your network.
The following default address is preset at the factory: 192.168.0.1
– Start the Web browser.
– Enter the IP address of the VIP X2 as the URL. The connection is established
and after a short time you will see the LIVEPAGE with the video image.
Configuration using a Web browser
Installation and Operating Manual | VIP X2
Bosch Security Systems | 2006-12 | V2.5