Bosch VIPX2 Installation And Operating Manual page 78

EN | 78
Selecting the area
You can select the image areas in the reference image that are to be monitored.
The video image is subdivided into 858 square fields. You can activate or deac-
tivate each of these fields individually.
Note
Select only those areas for reference monitoring in which no movement
takes place and that are always evenly lit, as false alarms could otherwise
be triggered.
– Click Select area to configure the sensor fields. A new window will open.
– If necessary, click Clear all first to clear the current selection (fields marked
red).
– Left-click the fields to be activated. Activated fields are marked red.
– If necessary, click Select all to select the entire video frame for monitoring.
– Right-click any fields you wish to deactivate.
– Click OK to save the configuration.
– Click the close button (X) in the window title bar to close the window without
saving the changes.
Configuration using a Web browser
Installation and Operating Manual | VIP X2
Bosch Security Systems | 2006-12 | V2.5