Table 2-1
Screen Button Descriptions
Button
continued
Alert Handling
Click to change message text, or to cause the
system to execute a command or notify users if
a certain alert situation prevails.
Attachments
Click to configure your UPS load segments,
enabling individual control of load segments.
Set a server to a particular load segment or the
entire load.
IMPORTANT: This must be done first, before
other parameters can be set.
Shutdown
Click to shut down and restart your computer
Sched.
automatically at set times.
Comm Settings
Click to open the Communications Port Setup
window to configure the software for the
computer communications port being used for
communications with the UPS.
Device Software
Click to display the Device Software window for
the UPS subsystem.
Graph Voltage
Click to graph different parameters in a time
Parameters
graph. Draw a history graph of input/output
voltages, battery voltage, output frequency and
output load.
Close
Click to close the active window.
Help
Click to access Help from the active window.
Installation 2-13
Description