Compaq 204451-002 - UPS T2200 XR Reference Manual page 22

2-10 Compaq Power Products Software Reference Guide
4. On the UPS Group Member window, do one of the following:
G
UNIX: Enter the host name of the Group Controller and press the
Continue button.
G
Other operating systems: Type the IP address of the Group
Controller and press the Continue button.
Figure 2-4. UPS Group Member Configuration window
NOTE: On SCO OpenServer and UNIXWare systems without other means of name
resolution, the IP address and Hostname of the group Controller must be added to the
/ETC/HOSTS file before it can be entered during the Agent installation. The HOSTS file
may be changed using a text editor (OpenServer and UNIXWare 7.x) or with the Internet
Setup Utility (UNIXWare 2.x).
All members of the UPS Group may be managed via the CPM Console for the
UPS group Controller. Each member should be assigned to the load segment
to which it is attached by using the Attachments feature (described in
Chapter 3, "Operation"). After load segment assignment, individual settings
may be configured for each computer and/or load segment.