Delta 36-751 Brochure & Specs page 6

Sidekick
The Builder's Saw that's
got it all.
•
1 5
Cuts 2 ⁄ Ó at 90°; 1 ⁄ Ó at 45° blade
4 8
tilt—enough capacity to cut dimen-
sional 2 x 4 lumber.
•
Diecast aluminum table, with inte-
gral outfeed work support and T-slot
miter gage grooves, measures a full
26Ó x 20Ó.
•
Miter gage with adjustable positive
stops at 90° and 45° R&L for accu-
rate straight and angle cutting.
•
Self-aligning rip fence with single
control handle and easy-to-read
English/Metric rip scale.
•
1
Carbide-tipped 8 ⁄ Ó dia. x 18 ATB
4
saw blade included as standard
equipment.
•
Built-in holders and compartments
for miter gage, cord, rip fence,
blade guard, extra blade and
wrench set storage.
1
Model 36-275 Sidekick ® 8
Saw ® . Includes basic machine with
15 amp., 120V, 60 Hz. motor; rip fence,
miter gage, see-through blade guard with
splitter and anti-kickback fingers, carbide-
1
tipped 8 ⁄ Ó dia. x 18 ATB saw blade, table
4
insert, wrenches and instruction manual.
Integral outfeed work sup-
port handles large panels and
long stock; slides in, out of the
way, when not in use.
Motor ..................................... 15 amp., 120V, single phase, 60 Hz.
Blade:
Diameter ................................................................... 8
Arbor .............................................................................
Speed ............................................................................... 4500 rpm
Capacity:
Maximum depth of cut at 90° ..................................... 2
Maximum depth of cut at 45° ..................................... 1
Maximum rip to right of blade .................................... 12Ó (305 mm)
Table in front of blade at 1Ó depth of cut ..................... 8Ó (203 mm)
Maximum width of dado .............................................
1
®
8 ⁄
⁄ Ó Builder's
4
T-slot grooves hold miter
gage securely beyond front of
table, preventing it from falling
during wide cut-off operations.
SPECIFICATIONS
1
⁄ Ó (210 mm)
4
5
⁄ Ó (16 mm)
8
1
⁄ Ó (57 mm)
4
5
⁄ Ó (41 mm)
8
13
⁄ Ó (21 mm)
16
" Builder's Saw
4
Built-in holders and compart-
ments for out-of-the-way miter
gage, rip fence, blade guard, extra
blade and wrench set storage;
easier accessibility when needed.
Table:
Size ........................................................ 26Ó x 20Ó (660 x 508 mm)
with accessory extension wing ............ 32Ó x 20Ó (813 x 508 mm)
Height ..................................................................... 12
T-slot ............................................................
Overall Dimensions:
Height ..................................................................... 15
Width ......................................................................... 26Ó (660 mm)
Depth ...................................................................... 25
Weight ................................................................... 48
10
®
®
Model 36-275
Sidekick ® 8 1 ⁄ Ó Builder's
4
Saw ®
Convenient carrying handle
and cord holder bracket for
safe and easy transport from
job to job.
1
⁄ Ó (308 mm)
8
3 3
⁄ Ó x ⁄ Ó (10 x 19 mm)
8 4
7
⁄ Ó (403 mm)
8
3
Ó (645 mm)
⁄
8
1
⁄ Ibs. (22 kg)
2
For accessories, see page 29