Delta 36-751 Brochure & Specs page 4

Solid construction and
quality features make this
saw one smooth operator.
•
1
Powerful 1 ⁄ HP, single phase induction
2
motor provides the power to handle any
cutting operation.
•
Auto-Set ® T-Slot miter gage has adjustable stops at 45°
and 90° for precision straight and angle cutting jobs.
•
Rack and worm gear blade elevating mechanism
raises and lowers blade smoothly and easily.
•
See-through blade guard with splitter and anti-
kickback fingers promotes operator safety.
•
Accessory dust collector connector mounts to saw
carriage for attaching a dust collection system
right at the source of dust and chips.
•
Large on/off paddle switch.
Model 36-630 10Ó Contractor's Saw
1
machine with 1 ⁄ HP, single phase motor, blade guard,
2
splitter and anti-kickback fingers, Jet-Lock
bars, Auto-Set ® miter gage, 10Ó saw blade, table insert,
arbor pulley, motor pulley, V-belt, two extension wings,
steel leg stand and instruction manual.
Model 36-640 10Ó Contractor's Saw
Saw Guide. Same as above less Jet-Lock
front and rear guide bars and one table extension wing,
but with 29Ó Precision Saw Guide, carriage assembly, front
guide rail, table frame, mounting hardware and
instruction manual. Less table board.
Cast iron 20Ó x 27Ó table with
T-slotted miter gage grooves
and two extension wings.
1
Motor ................................. 1 ⁄
2
Blade:
Diameter .................................................................... 10Ó (254 mm)
Arbor .............................................................................
Speed ............................................................................... 3000 rpm
Capacity:
Maximum depth of cut at 90° ..................................... 3
Maximum depth of cut at 45° ..................................... 2
Maximum rip to right of blade:
Model 36-630 ....................................................... 24Ó (610 mm)
Model 36-640 ....................................................... 29Ó (737 mm)
Maximum rip to left of blade ................................... 12
Table in front of saw blade at max. cut ................... 12
Maximum width of dado .............................................
10" Contractor's Saw
® Il. Includes basic
® rip fence, guide
® Il with Precision
rip fence with
®
Self-aligning Jet-Lock ®
Micro-Set ® rip fence glides
on chrome-plated rails.
SPECIFICATIONS
HP, 115/230V, single phase, 60 Hz.
5
⁄ Ó (16 mm)
8
1
⁄ Ó (79 mm)
8
1
⁄ Ó (54 mm)
8
1
Ó (311 mm)
⁄
4
1
⁄ Ó (311 mm)
4
13
⁄ Ó (21 mm)
16
®
Model 36-640 10Ó Contractor's Saw II
with 29Ó Precision Saw Guide
Table:
Size ........................................................ 20Ó x 27Ó (508 x 686 mm)
Size with extension wings .................... 40Ó x 27Ó (1016 x 686 mm)
Height ..................................................................... 35
T-slotted miter gage grooves .......................
Overall Dimensions:
Length:
Model 36-630 ..................................................... 44Ó (1118 mm)
Model 36-640 ..................................................... 42Ó (1067 mm)
Width:
Model 36-630 ..................................................... 48Ó (1219 mm)
Model 36-640 ..................................................... 59Ó (1499 mm)
Height:
Model 36-630 ..................................................... 40Ó (1016 mm)
Model 36-640 .................................................. 40
Weight:
Model 36-630 ..................................................... 188 lbs. (85 kg)
Model 36-640 ..................................................... 202 lbs. (92 kg)
8
II
®
Model 36-630
10Ó Contractor's Saw ®
1
⁄ Ó (902 mm)
2
3 3
⁄ Ó x ⁄ Ó (10 x 19 mm)
8 4
1
Ú Ó (1029 mm)
2
For accessories, see page 27
II