Dtv Signal; Channel Label - Zenith HDR230 Installation And Operating Manual, Warranty

Setup Menu Options (Continued)

DTV Signal

Shows the strength bar for incoming signal to help you adjust the antenna to
the correct position from your location.
Press MENU to display the on-screen menu.
1 1
Select the SETUP menu using 3 3 / 4 4 then press
2 2
Select the DTV Signal using 3 3 / 4 4 .
3 3
The signal strength bar will be displayed.
Press MENU to return to the previous screen or press EXIT on the
4 4
remote control to return to TV viewing.
ip
You can also view signal strength bar by pressing SIGNAL on the remote
control.

Channel Label

You are also able to add the logo of a channel to the Surf channel list by
pressing the (SELECT) button on the remote. A dialog box will ask what
you want to do with the highlighted logo area: you can replace the highlight-
ed logo area with the current channel, or delete it.
Press MENU to display the on-screen menu.
1 1
Select the SETUP menu using 3 3 / 4 4 then press
2 2
EZ Scan will be highlighted.
Select the Ch. Label using 3 3 / 4 4 then press
3 3
Ch. Label menu appears.
Select a channel to add a logo to with CH (+/–).
4 4
Select a logo using 3 3 / 4 4 / 1 1 / 2 2 .
5 5
Press (SELECT).
6 6
The logo is added to the channel.
Repeat steps 4 and 6 to add additional logos.
7 7
Press MENU to return to the previous screen or press EXIT on the
8 8
remote control to return to TV viewing.
(SELECT) or 2 2 .
(SELECT) or 2 2 .
(SELECT) or 2 2 .
17