Manually Set The Image Size - Xerox DocuMate 3220 User Manual

Manually set the image size

1. Place an item on the scanner glass and click Preview in the TWAIN interface.
2. In the previewed image, click and drag a box around the area you want to scan.
3. The dotted outline shows the selected area in the image.
4. You can now move or resize the outline to select the specific area you want to scan.
To move the dotted outline, put the pointer in the selected area, then click and drag the mouse.
To resize the selected area, put the pointer on a dotted line, then click and drag the mouse.
5. If you want to remove the selected area and start over, click Remove on the Scan Info box.
6. When the settings are what you want, click Scan.
This example shows a manually selected area.
The Scan Info box shows the
size and position of the area.
This is the image that appears
on the PaperPort desktop when
scanning is finished.
Xerox DocuMate 3220
User's Guide
141