Scanning From Twain - Xerox DocuMate 3220 User Manual

Scanning from TWAIN

This chapter includes:
• Accessing the TWAIN Interface
• The Two TWAIN Interface Options
• Scanning from the Basic Interface
• Scanning from the TWAIN Advanced Interface
• Adjusting the Image with the Advanced Interface
You can scan from any TWAIN scanning application instead of scanning from the One Touch buttons
on your scanner or the One Touch button panel.
A Note About Your Scanner and the TWAIN standard: TWAIN is a widely recognized standard that
computers use to receive images from scanners, digital cameras, and other digital devices. The TWAIN
scanning interface can be accessed from any TWAIN scanning application you have installed on the
computer. Applications such as Nuance PaperPort and OmniPage, and many other applications, can
use the TWAIN interface for scanning.
The TWAIN interface, described in this section, is the one provided with your scanner and you will see it
when scanning from PaperPort or OmniPage. Other TWAIN compliant scanning applications may also
access this interface. However, there are some applications that have their own TWAIN interface. If you
are scanning from a software application, and see the interface shown in this section, you can use
these instructions to scan with the TWAIN interface. If you do not see this TWAIN interface, please
refer to your scanning application's user guide for instructions.
on page 128
on page 129
on page 130
on page 133
on page 136
5
Xerox DocuMate 3220
User's Guide
127