Repeating Defects - Xerox Phaser 7760 User Manual

Repeating Defects

Problem
Spots or lines appear at regular intervals on the
page, in the direction the paper moves through
the printer, in only one color.
Solution
Print the Repeating Defects page to view instructions for correcting the problem. To print the
Repeating Defects page:
1. On the control panel, select
2. Select
Print Quality Problems
3. Select
Repeating Defects
The Repeating Defects page prints.
4. Follow the instructions on the page to measure the distance between the defects and
identify the item causing the defects.
5. Replace the item causing the defects.
Note:
If the Transfer Roller is replaced, on the control panel, select
, and then select
Supplies Info
If the Accumulator Belt is replaced, on the control panel, select
Service Tools , and then select
Spots or lines appear at regular intervals on the
page, in the direction the paper moves through
the printer, in all colors and/or in non-printed
, and then press the OK button.
Troubleshooting
, and then press the OK button.
, and then press the OK button.
Reset Transfer Roller Life
Reset Accumulator Belt Life
Phaser® 7760 Color Laser Printer
4-8
Solving Print-Quality Problems
areas.
7400-206
, select
Information
.
Troubleshooting , select
.