Repeating Defects - Xerox Phaser 4510 User Manual

Repeating Defects

Marks or voids are regularly repeated on the page. Use the following table to determine the
supply that needs replacing.
Defect Spacing
38 mm (1.5 in.)
52 mm (2.0 in.)
94.4 mm (3.72 in.)
51 mm (2.0 in.)
94.2 mm (3.7 in.)
Different supplies may create print defects with similar measurements. To identify the faulty
supply:
1.
2.
3.
To order Xerox supplies, contact your local reseller or go to
4510supplies.
Downloaded From ManualsPrinter.com Manuals
Replace the print cartridge (do not discard the packaging).
If the problem continues:
a. Remove and repackage the new print cartridge.
b. Reinstall the original print cartridge.
c. Replace the maintenance kit (fuser and transfer roller).
If the problem continues, contact your Customer Support Center.
Supply to Replace
print cartridge
print cartridge
print cartridge
transfer roller
fuser
Phaser® 4510 Laser Printer
4-15
Solving Print-Quality Problems
www.xerox.com/office/