Incomplete Fusing - Xerox Phaser 7760 User Manual
Color laser printer
Hide thumbs
Also See for Phaser 7760:
- Service manual (564 pages) ,
- User manual (158 pages) ,
- Advanced features manual (105 pages)
Table of Contents
Advertisement
Incomplete Fusing
Problem
Toner appears to be missing from the print, or rubs off easily.
Solution
1.
Verify that the paper you are using is the correct type for the printer. See
and Media
on page 3-3.
2.
Verify that the paper is properly loaded in the tray, and the correct paper type is selected in
the
Paper Tray Setup
If the problem continues:
1.
Do one of the following:
■
Tray 1 (MPT): Remove and re-insert the paper.
■
Tray 2-5: Open and close the selected paper tray. The control panel prompts you to
confirm or change the paper type.
2.
On the control panel, select
following:
■
Select the correct paper type, and then press the OK button.
■
Select the next heavier type of paper, and then press the OK button.
Note:
Paper types from lightest to heaviest are: Plain Paper, Heavy Plain Paper, Thin Card
Stock, Thick Card Stock, Extra Thick Card Stock.
menu. See
Loading Paper
, press the OK button, and then do one of the
Change
Phaser® 7760 Color Laser Printer
4-10
Solving Print-Quality Problems
Supported Paper
on page 3-9.
Advertisement
Table of Contents
