Choosing Output Options; Output Trays - Xerox Phaser 7760 User Manual

Choosing Output Options

This section includes:
■ Offsetting Output on page 3-49
■ Stapling Output on page 3-50
Using the Hole Puncher
■

Output Trays

The printer has one output tray located on the top of the printer. If a finisher is installed the
following output options are available:
■ Top output tray (horizontal transport)
■ Finisher upper output tray
Finisher stacker output tray
■
■ Finisher booklet output tray
Note:
If you select stapling or hole punching in the printer driver, the output automatically
goes to a finisher output tray.
Selecting an Output Tray from the Printer Driver
To select an output tray for a specific print job:
Operating System
Windows 98 SE,
Windows 2000,
Windows XP,
Windows Server 2003
Mac OS 9 or
Mac OS X, version
10.2 and higher
See also:
Stapling Output on page 3-50
Using the Hole Puncher
on page 3-51
Steps
1. Select the Output Options tab.
2. Select the ouput tray from the Paper Destination drop-down list.
1. In the Print dialog box, select Finishing Options from the drop-down
list.
2. Select the output tray from the Paper Destination drop-down list.
on page 3-51
Phaser® 7760 Color Laser Printer
3-48
Choosing Output Options