Stapling Output - Xerox Phaser 7760 User Manual

Stapling Output

If your printer has a finisher, you can have the printer staple sets of up to 50 sheets of 75 g/m
(20 lb. Bond Paper).
If your printer has a finisher with the booklet maker, you can have the printer saddle staple and
fold sets of up to 15 sheets to make a booklet. It can also fold sets of up to 5 sheets without
stapling.
Use the following guidelines when stapling paper:
■ To be stapled, the sheets of paper must have a width between 203–297 mm (8–11.7 in.)
and height between 182–432 mm (7.2–17 in.).
■ Extra Thick Card Stock, glossy paper, transparencies, labels, and envelopes are not
stapled.
■ To use the booklet maker, the paper size must be Letter (short-edge feed), US Folio, Legal,
Tabloid, A4 (short-edge feed), A3, or B4 JIS.
Stapling Options
The following stapling options are available from the printer driver:
■ None (default): The prints are not stapled.
■ Front: Inserts one staple in each set of copies. (For portrait long-edge feed paper,
staples the upper-left corner.)
Rear: Inserts one staple in each set of copies. (For portrait long-edge feed paper,
■
staples the lower-left corner.)
■ Dual: Inserts two staples in each set of copies. (For portrait long-edge feed paper,
staples the left edge.)
■ Quadruple: Inserts four staples in each set of copies. (For portrait long-edge feed
paper, staples the left edge.)
■ Saddle: Inserts two staples on the center line of each set of copies. Each set is then
folded along the center line and sent to the lower tray of the finisher.
■ Fold (No Staple): Each set of copies is folded along the center line and sent to the
lower tray of the finisher.
See also:
Advanced Features Guide at
Stapling Orientation
The sample image in the printer driver displays the location of the staples, which changes
depending on the orientation of the page and the paper feed direction (long-edge feed or
short-edge feed).
See also:
Loading Paper on page 3-9
www.xerox.com/office/7760support
Phaser® 7760 Color Laser Printer
3-50
Choosing Output Options
2