Cut-Out Dimensions; Product Dimensions; Door Swing/Clearances Information - U-Line CLR2060 Installation Manual

Echelon series clear ice maker
Hide thumbs Also See for CLR2060:
Table of Contents

Advertisement

3 Prepare Site
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides or rear.
However, the front grille must NOT be obstructed and
clearance is required for water, drain and electrical
connections in the rear.
Note: Unit can NOT be installed behind a closed cabinet
door.

Cut-Out Dimensions

for Power Supply
34-1/4"
to
35-1/8"
8"
Figure 1
Follow the cut-out drawing in Figure 1. The 15-3/16"
width allows 1/4" for ease in installation and removal of
the unit. The 24" depth is the counter depth in most
installations. The unit is 24" deep including the handle
on Black and White models and 24" deep including the
door and not the handle on Stainless Steel models (see
Figure 2).
IMPORTANT
If you would like to align the face of the unit with other
adjacent cabinet doors in certain installations, you may
need to alter the wall just behind the drain connection on
the unit to accommodate the drain. The actual amount of
alteration will be determined by your actual drain
connection components.
www.U-LineService.com
CLR2060 — Clear Ice Maker
See Electrical
Specifications
24"
15-3/16"

Product Dimensions

24"
Including
Handle
34-1/8"
14-15/16"
Black and White
Figure 2
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see Figure 44 on Page 17.)

Door Swing/Clearances Information

Black and White units have a zero clearance for the door
to open 90° (see Figure 3). Stainless Steel models require
a minimum of 2-1/8" door clearance to accommodate the
handle if the unit is installed next to a wall or similar type
of structure.
Wall
1/4" Min.
21-3/4"
16-1/2"
90°
Door Swing
Black and White
Figure 3
4
26-1/8"
Including
Handle
34-1/8"
14-15/16"
Stainless Steel
Wall
2-1/8" Min.
21-3/4"
16-1/2"
90°
Door Swing
Stainless Steel
02/2005

Advertisement

Table of Contents
loading

Table of Contents