Table of Contents
Advertisement
Installing the Outer Chassis Rails
1.
Locate the two pairs of outer rails. Each pair consists of one middle rail, one
end bracket and one end rail as shown.
Middle Rail
Figure 5-2: Assembling the Outer Chassis Rails
2.
Insert the end bracket and the end rail onto the middle rail and secure them
with the screws as shown.
3.
Install a set of outer rail assemblies to each side of the rack and secure them
with the screws provided.
4.
Check that both sets of inner rails are securely attached to the chassis.
5.
Check that both sets of outer rails are securely attached to the rack.
6.
Insert the inner rails on the chassis, into the outer rails on the rack.
7.
Gently slide the chassis into position within the rack.
End Bracket
5-5
Chapter 5: Rack Installation
End Rail
Advertisement
Table of Contents
