Completing Your Installation With A Bowl Light Fixture - Hunter Type 2 Owners And Installation Manual

7 • Completing Your Installation With a Bowl Light Fixture
Your Hunter fan comes with an integrated light fixture
assembly.
WARNING: Use only the light fixture supplied with this
fan model.
7-1. To attach the upper switch housing, partially
install two housing assembly screws into the
switch housing mounting plate.
7-2. Feed the upper plug connector through the center
opening of the housing.
7-3. Align the keyhole slots in the housing with the
housing assembly screws.
7-4. Turn the upper switch housing counter clockwise
until the housing assembly screws are firmly
situated in the narrow end of the keyhole slots.
Install the remaining screw into the housing.
Tighten all three screws firmly.
CAUTION: Make sure the upper switch housing
is securely attached to the switch housing mounting
plate. Failure to properly attach and tighten all three
assembly screws could result in the switch housing
and light fixture falling.
Upper
Switch
Housing
Steps 7-1 – 7-4
10
44258-01 • 12/09/09 • Hunter Fan Company
Mounting
Housing
Assembly
Screw
Switch
Housing
Plate