Standby Display
While the machine is on standby (immediately after it is turned on or after the
{Cancel} key is pressed), the following display is shown.
❖ Returning the machine to the standby display
To return the machine to the standby display manually, do one of the follow-
ing:
• If you have placed an original and have not pressed the {Start} key, remove
the original.
• If you have not set an original, press the {Energy Saver/Clear Modes} key.
• If you are in User Tools mode, press the {User Tools} key or the {Cancel} key.
Communication Display
While the machine is communicating, the status is displayed.
❖ Memory Transmission
The destination's (Receiver's) name or fax number appears on the top of the
display.
❖ Memory Reception
The destination's (Sender's) name or fax number appears on the top of the dis-
play.
Note
❒ Even when the machine is sending a fax message from memory or receiv-
ing a fax message into memory, you can still scan the next original into
memory.
❖ Immediate Transmission
Control Panel
1
27