Error Messages - Ricoh FAX4430NF Operating Instructions & Basic Features

Error Messages

The following messages may appear while you are operating or programming
the machine.
Message
No Files Exist
Cannot Combine : (currently se-
lected function)
This Key is in Use as a Group Dial This Quick Dial key has a Groupstored in it.
This Key is in Use as a Program
This Key is in Use as a Quick Dial This Quick Dial key has a QuickDial stored in it.
This Key is in Use as an Auto Doc-
ument
This Key is Not Programmed
This Speed Dial No. is Not Pro-
grammed
This Dest. is Already Selected
Insert Pause "-" After Area Code
Communication Failed
Please Change The Remote ID
Load Paper
Clear Misfed Original(s)
Clear Misfed Paper
Close Front/Right Cover
Close Lower Right Cover
Close ADF Cover
Causes and Solutions
One of the following:
• There are no documents in memory waiting for trans-
mission.
• Incorrect file number is entered. Check the file number
and try again.
• No polling reception operations have been pro-
grammed.
Appears when you attempt to select a function that cannot
be used in combination with another currently selected-
function.
This Quick Dial key has a Keystroke Program stored in it.
This Quick Dial key has an Auto Document stored in it.
One of the following:
• This Quick Dial key does not contain a number.
• This Quick Dial key does not contain a Keystroke Pro-
gram.
This Speed Dial number does notcontain a number.
One of the following:
• This number is already included in this Group.
• The same destination was specified more than once.
You must add a pause after yourarea code when you input
your fax terminal's own telephone number.
A communication was not successful.
The Requesting Party entered the wrong Remote ID five
times successively while making a Remote Transfer Re-
quest to the Transfer Station (your machine).
Paper is loaded in none of the paper trays.
A original is jammed in the ADF.
Paper is jammed in the printer.
The front cover or right cover is not closed properly.
The lower right cover is not closed properly.
The ADF cover is not closed properly.
Error Messages
4
101