Onboard Devices; Pci Devices; Pci Vga Configuration; Bus Options - HP DC7600 - Utility Manual

Computer Setup (Continued)
Heading
Advanced*
(continued)
*For advanced
users only.
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Onboard Devices

PCI Devices

PCI VGA Configuration

Bus Options

www.hp.com
Description
Allows you to set resources for or disable
onboard system devices (diskette controller,
serial port, or parallel port).
• Lists currently installed PCI devices and
their IRQ settings.
• Allows you to reconfigure IRQ settings for
these devices or to disable them entirely.
These settings have no effect under an
APIC-based operating system.
Displayed only if there are multiple PCI video
adapters in the system. Allows you to specify
which VGA controller will be the "boot" or
primary VGA controller.
✎
In order to see this entry, you must enable
Integrated Video (Advanced > Device
Options) and Save Changes and Exit.
On some models, allows you to enable or
disable:
• PCI SERR# Generation.
• PCI VGA palette snooping, which sets the
VGA palette snooping bit in PCI
configuration space; only needed when
more than one graphics controller is
installed.
Computer Setup (F10) Utility
23