System Ids; Drivelock Security (Some Models) - HP DC7600 - Utility Manual

Computer Setup (Continued)
Heading
Security
(continued)
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Option

System IDs

DriveLock Security (some
models)
www.hp.com
Description
Allows you to set:
• Asset tag (18-byte identifier) and
ownership Tag (80-byte identifier
displayed during POST).
See the Desktop Management Guide on
the Documentation and Diagnostics CD
for more information.
• Chassis serial number or Universal Unique
Identifier (UUID) number. The UUID can
only be updated if the current chassis
serial number is invalid. (These ID
numbers are normally set in the factory
and are used to uniquely identify the
system.)
• Keyboard locale setting (for example,
English or German) for System ID entry.
Allows you to assign or modify a master or
user password for hard drives. When this
feature is enabled, the user is prompted to
provide one of the DriveLock passwords during
POST. If neither is successfully entered, the
hard drive will remain inaccessible until one of
the passwords is successfully provided during
a subsequent cold-boot sequence.
✎
This selection will only appear when at
least one drive that supports the DriveLock
feature is attached to the system.
See the Desktop Management Guide on the
Documentation and Diagnostics CD for more
information.
Computer Setup (F10) Utility
15