Smart Cover; Embedded Security - HP DC7600 - Utility Manual

Computer Setup (Continued)
Heading
Security
(continued)
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Smart Cover

Embedded Security

www.hp.com
Description
Allows you to:
• Lock/unlock the Cover Lock.
• Set the Cover Removal Sensor to
Disable/Notify User/Setup Password.
✎
Notify User alerts the user that the sensor
has detected that the cover has been
removed. Setup Password requires that the
setup password be entered to boot the
computer if the sensor detects that the
cover has been removed.
This feature is supported on some models only.
See the Desktop Management Guide on the
Documentation and Diagnostics CD for more
information.
Allows you to:
• Enable/disable the Embedded Security
device
• Reset the device to Factory Settings
• Enable/disable power-on authentication
support. (some models)
• Reset authentication credential. (some
models)
This feature is supported on some models only.
See the Desktop Management Guide on the
Documentation and Diagnostics CD for more
information.
Computer Setup (F10) Utility
13