Option Rom Configuration For Arrays; Hp Proliant Essentials Rapid Deployment Pack; Re-Entering The Server Serial Number And Product Id - Compaq 234664-002 - ProLiant - ML330T02 Troubleshooting Manual

ACU Diagnostics never collects information about the data content of logical drives. The diagnostic report
does not collect or include the following:
•
File system types, contents, or status
•
Partition types, sizes, or layout
•
Software RAID information
•
Operating system device names or mount points
Optio n ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical drive, ass
RAID levels, and establish online spare configurations.
The utility also provides support for the following functions:
•
Reconfiguring one or more logical drives
•
Viewing the current logical drive configuration
•
Deleting a logical d
•
Setting the controller to be the boot controller
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding array controller configurati
For more information regarding the default configurations that ORCA uses, refer to the HP ROM-Based
Setup Utility User Guide on the Documentation CD.
HP Pr oLiant Essentials Rapid Deployment Pack
The RDP software is the preferred method for rapid, high-volume server deployments. The RDP softwar
integrates two powerful products: Altiris Deployment Solution and the HP ProLiant
The intuitive graphical user interface of the Altiris Deployment Solution console provides simplified point-
and-click and drag-and-drop operations that enable you to deploy target servers, including server blades,
remotely. It enables you to perform imaging or scripting functions and maintain software images.
For more information about the RDP, refer to the HP ProLiant Essentials Rapid Deployment Pack CD
refer to the HP websit

Re-entering the server serial number and product ID

After you replace the system bo
During the server startup sequence, p
1.
Select the System Options menu
2.
Select Serial Number. The following warning is
3.
WARNING! WARNING! WARNING! The serial number is loa
during the manufacturing process and should N
should only be used by qualified service personnel. This value should
always match the serial
Press the Enter key to clear the warning.
4.
rive configuration
e (http://www.hp.com/servers/rdp
ard, you must re-enter the server serial number and the product ID.
ress the F9 key to access RBSU.
.
number sticker located on the chassis.
on, refer to the controller user guide.
).
displayed:
ded into the system
OT be modified. This option
Software tools and solutions 68
ign
e
Integration Module.
or