Wan Acls; Figure 48: Wan Acl Configuration - SMC Networks SMC7904WBRAS-N2 V2 User Manual

C
URRENT
Lists the configured ACLs on the LAN ports.
◆ Select — The number of the entry in the table.
Direction — Displays if the ACL is applied to a LAN or WAN interface.
◆
IP Address/Interface — Displays the allowed IP address or range.
◆
Service — Dispays the allowed service.
◆
Port — Displays the TCP/UDP port of the allowed service.
◆
Action — Click the button to remove the entry from the table.
◆
When you select WAN for the ACL "direction," you can configure ACLs that
WAN ACL
S
apply to WAN interfaces.

Figure 48: WAN ACL Configuration

The following items are displayed on this page:
WAN Setting — Selects a WAN interface or IP address.
◆
WAN Interface — Specifies a configured WAN interface for the
■
ACL.
IP Address — Specify a LAN IP address or range of addresses that
■
are allowed access to the ADSL Router.
Services Allowed — Specifies services that are allowed access from
◆
LAN interfaces, or allows "any."
ACL T
ABLE
– 93 –
| Services
C 8
HAPTER
Access Control Lists