Cable Connections; Figure 4: Connecting The Router - SMC Networks SMC7904WBRAS-N2 V2 User Manual

C C
ABLE ONNECTIONS
Power requirements: 12 VDC using the included AC power adapter.
◆
Make sure that a properly grounded power outlet is within 1.8 m (6 ft)
of the router.
◆ The router should be located in a cool dry place, with at least
5 cm (2 in.) of space on all sides for ventilation.
Place the router out of direct sunlight, and away from heat sources or
◆
areas with a high amount of electromagnetic interference. The
temperature and humidity should be within the ranges listed in the
specifications.
The ADSL Gateway Router needs to be connected to the DSL telephone line
from the service provider, and to a computer or LAN switch.

Figure 4: Connecting the Router

Telephone Wall Jack
Splitter
Telephone
To install the router, follow these steps:
Using standard telephone cable, connect the Line port on the included
1.
ADSL splitter to the RJ-11 telephone wall jack providing the ADSL
service.
Using standard telephone cable, connect the Modem port on the
2.
included ADSL splitter to the RJ-11 Line port on the ADSL Gateway
Router.
– 31 –
C
HAPTER
Standard
Telephone
Cable
Category 5
UTP Cable
| Installing the Router
2

Cable Connections

AC Power Outlet
AC Power
Adapter
Computer