Ipv6 Lan Configuration; Figure 35: Ipv6 Lan Configuration - SMC Networks SMC7904WBRAS-N2 V2 User Manual

IP 6 LAN C
V ONFIGURATION
LAN Port — Selects the LAN port.
◆
Link Speed/Duplex Mode — Selects the port speed and duplex
◆
mode, or sets the port for auto-negotiation.
MAC Address Control — Filters out traffic with source MAC addresses
◆
not configured in the table. For devices that need Internet access
through the LAN port, enter the MAC address and click Add.
This section describes how to configure an initial IPv6 interface for
management access over the network, or for creating an interface to
multiple subnets. This router supports both IPv4 and IPv6, and can be
managed through either of these address types.
IPv6 includes two distinct address types – link-local unicast and global
unicast. A link-local address makes the router accessible over IPv6 for all
devices attached to the same local subnet. However, to connect to a larger
network with multiple segments, the router must be configured with a
global unicast address.

Figure 35: IPv6 LAN Configuration

– 74 –
| LAN Settings
C 6
HAPTER

IPv6 LAN Configuration