If You Cannot Connect To The Internet; Problems Accessing The Management Interface; Table 4: Web Access Troubleshooting Chart - SMC Networks SMC7904WBRAS-N2 V2 User Manual

I Y C C
F OU ANNOT ONNECT TO THE
P A
ROBLEMS CCESSING THE
I
NTERNET
Check that your computer is properly configured for TCP/IP. For more
◆
information, see "Configuring the TCP/IP Protocols" on page
Make sure the correct network adapter driver is installed for your PC
◆
operating system. If necessary, try reinstalling the driver.
Check that the network adapter's speed or duplex mode has not been
◆
configured manually. We recommend setting the adapter to auto-
negotiation when installing the network driver.
M
ANAGEMENT

Table 4: Web Access Troubleshooting Chart

Symptom Action
◆
Cannot connect using a
web browser
◆
◆
◆
Forgot or lost the ◆
password
– 142 –
A
PPENDIX

If You Cannot Connect to the Internet

I
NTERFACE
Be sure the router is powered up.
Check the network cabling between the management
station and the router.
Check that you have a valid network connection to the
router and that the port you are using has not been
disabled.
Be sure the management station has an IP address in the
same subnet as the router's IP interface to which it is
connected.
Press and hold down the Reset button for 3 seconds or
more to restore the unit's factory default settings, then use
the default password to access the web interface.
| Troubleshooting
A
32.