Figure 39: Device Ip Range Table - SMC Networks SMC7904WBRAS-N2 V2 User Manual

MAX Lease Time — Select a time limit for the use of an IP address
◆
from the IP pool. When the time limit expires, the client has to request
a new IP address. The lease time is expressed in seconds.
(Default: 86400 seconds; Range: 60~86400 seconds; -1 indicates an
infinite lease time)
Domain Name — Specifies the unique name used to identify the ADSL
◆
Router on the network.
DNS Servers — Sets up to three domain name server IP addresses.
◆
Set VendorClass IP Range — Click on this option to assign IP
◆
address ranges to specific device types.
Device Name — Describes the device type.
■
Start/End Address — Specifies the IP addresses from the DHCP IP
■
pool to assign to this device type.
Router Address — Specifies a default router IP address to use for
■
traffic from this device.
Option 60 — Specifies the DHCP Option 60 vendor class identifier
■
that indicates the device type.

Figure 39: Device IP Range Table

– 79 –
| LAN Settings
C 6
HAPTER
DHCP Settings