MAC F
ILTERING
MAC based packet filtering enables the router to filter clients based on their
physical layer address.
Figure 58: MAC Filtering Settings
The following items are displayed on this page:
Outgoing Default Policy — A default action for MAC addresses not
◆
configured in the filter table. (Default: Allow, maximum 32 entries are
allowed.)
Incoming Default Policy — A default action for MAC addresses not
◆
configured in the filter table. (Default: Allow, maximum 32 entries.)
The default outgoing and incoming defaults allow traffic from all MAC
N
:
OTE
addresses.
Direction — Specifies the packet destination. (Default: Outgoing)
◆
Action — Specifies if traffic should be permitted or denied. (Options:
◆
Deny, Allow; Default: Deny)
Source MAC Address — Specifies a source MAC address.
◆
Destination MAC Address — Specifies a destination MAC address.
◆
– 105 –
| Services
C
8
HAPTER
MAC Filtering