The fourth page of the wizard configures wireless settings for the ADSL
S
4 - W
TEP
IRELESS
router.
S
ETTINGS
Figure 10: Wizard Step 4 - Wireless Settings
The following items are displayed on the first page of the Wizard:
◆
◆
◆
◆
WLAN Interface — Enables/disables the wireless 802.11b/g/n
interface.
Band — Selects the operating band and mode. The router supports the
2.4 GHz band and can operate in any combination of 802.11b, g, or n
modes.
SSID — Specifies an SSID (service set identifier) which must be the
same as that on all wireless clients that wish to associate with the unit.
Encryption — Specifies the security used to protect your wireless
network. (Default: None)
None: Allows any wireless client within range to associate with the
■
ADSL/Router.
WEP: Provides a basic level of security using static shared keys that
■
are distributed to all clients. Be sure to configure at least one static
key. Alternatively, enable 802.1X authentication to dynamically
create and distribute keys from a RADIUS server.
WPA(TKIP/AES): Wi-Fi Protected Access (WPA) using either a
■
static pre-shared key, or 802.1X authentication through a RADIUS
server. The encryption used is either TKIP or AES.
– 43 –
| System Configuration
C
3
HAPTER
Setup Wizard