Console Login Configuration - SMC Networks 8606SX - annexe 1 Management Manual

Console Login Configuration

Use the Management Setup: Console Login Configuration to restrict
management access based on specified user names and
passwords, or to set the invalid password threshold and timeout.
There are two user types, Administrator and Guest. Only the
Administrator has write access for parameters governing the SNMP
agent. You should therefore assign a user name and password to
the Administrator as soon as possible, and store it in a safe place.
(If for some reason your password is lost, or you cannot gain
access to the System Configuration Program, contact SMC
Technical Support for assistance.) The parameters shown on this
screen are indicated in the following figure and table.
<AP PLY>
Us e <TAB > or arrow keys to m ove, other keys to ma ke ch anges .
Parameter
Password
Threshold
Lock-out Time 0
U
SING THE
Ti gerSw itch 1000 SMC860 8SX
Con sole Login Conf igurat ion
Pas sword Thre shold
Loc k-out Time (in minute s) : 0
Use r Typ e
--- ----- ----- ----- ------ ----- ----- -
ADM IN :
GUE ST :
Default
3
S C
YSTEM
User Name
admin
guest
< OK>
Description
Sets the password intr usio n threshold
which limits the number of failed logo n
attempts.
Range : 0~65535
The time (in seconds) the man agement
console will be disabled due to an
excessive number of failed logon attempts.
Range : 0~65535 (0 indicates disabled)
P
ONFIGURATION
: 3
Pa sswor d
<CA NCEL>
ROGRAM
2-21