Table of Contents
Advertisement
The following table describes the parameters and buttons in this page:
Field
Enable WDS
MAC Addr
Comment
Apply Change
Reset
Current WDS AP List
Delete
Delete All
3.6 WAN
In the navigation bar, click WAN. The WAN page that is displayed contains WAN Interface and ADSL Settings.
3.6.1
WAN Interface
Choose WAN > WAN Interface, and the page as shown in the following figure appears. In this page, you can
configure WAN interface of your router.
Select the checkbox to enable WDS. You need to enable WDS, if you want to
configure the parameters in this page.
Enter the MAC address of the AP.
Enter the comment to describe the AP of the MAC address.
Click it to add the MAC address and the comment into the Current WDS AP
List.
Click it to refresh the MAC address and the comment.
This table shows all APs of the WDS.
Click it to delete the row you select in the Current WDS AP List.
Click it to delete all rows in the Current WDS AP List.
30
Description
Advertisement
Table of Contents
