Table of Contents
Advertisement
3.2 Setup Wizard
In the navigation bar, click Setup Wizard. In the Setup Wizard page, you can configure the VPI/VCI number.
The Setup Wizard page guides fast and accurate configuration of the Internet connection and other important
parameters. The following sections describe these various configuration parameters. Whether you configure these
parameters or use the default ones, click NEXT to enable your Internet connection.
When subscribing to a broadband service, you should be aware of the method by which you are connected to the
Internet. Your physical WAN device can be either PPP, ADSL, or both. The technical information about the
properties of your Internet connection is provided by your Internet service provider (ISP). For example, your ISP
should inform you whether you are connected to the Internet using a static or dynamic IP address, and the protocol
that you use to communicate on the Internet.
Click NEXT, and the page as shown in the following page appears. In this page, you can set the system time
manually or get the system time from the time server.
The following table describes the parameters in this page:
Field
Enable SNTP Client Update
SNTP Server
Time Zone
Click NEXT, and the page as shown in the following page appears. In this page, you can configure the wireless
settings of the router.
Select the checkbox to enable Simple Network Time Protocol (SNTP).
After enabling SNTP, you can select the SNTP server from the drop-down
list. You can also manually enter the server IP address.
Select the time zone in which area you are from the drop-down list.
8
Description
Advertisement
Table of Contents
