Field
User Name
Password
Confirm Password
PPPoA
Select PPPoA as the protocol, and the page as shown in the following figure appears.
For the parameters in this page, refer to the parameter description of PPPoE protocol.
1483 MER: DHCP
Select 1483 MER: DHCP as the protocol, and the page as shown in the following page appears.
network. Its valid value is in the range of 32 to 65535 (0 to 31 is reserved for local
management of ATM traffic). In this example, VCI is set to 35.
Enter the user name for PPPoE dial-up, which is provided by your ISP.
Enter the password for PPPoE dial-up, which is provided by your ISP.
Enter the password again.
Description
12