Using The Setup Wizard - SMC Networks WBR14S-N3 - annexe 1 Manual

4
Initial Configuration

Using the Setup Wizard

There are only a few basic steps you need to set up the wireless AP/Router and
provide a connection for network access for other wireless stations.
The Setup Wizard takes you through configuration procedures for the general
network settings. Follow these steps:
Launch the Setup Wizard – Click "Setup Wizard" on the left side of the screen
1.
to enter the setup wizard page.
Operation Mode Configuration – Select the operation mode required for the
2.
network environment. Click "Next" to continue the setup.
Time Zone Settings – Select a time zone according to where the device is
3.
operated. Click Next after completing the setup.
4-2
Figure 4-2. Setup Wizard - Operation Mode
Figure 4-3. Setup Wizard - Time Zone Settings