Table 4-19 Show Logging Flash/Ram - Display Description - SMC Networks TigerSwitch SMC8728L2 Management Manual

C L
OMMAND INE
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message
level for flash memory is "errors" (i.e., default level 3 - 0), and the message
level for RAM is "debugging" (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level debugging
Console#

Table 4-19 show logging flash/ram - display description

Field
Syslog logging
History logging in
FLASH
History logging in
RAM
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: disable
REMOTELOG facility type: local use 7
REMOTELOG level type:
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
4-62
I
NTERFACE
Description
Shows if system logging has been enabled via the logging
on command.
The message level(s) reported based on the logging history
command.
The message level(s) reported based on the logging history
command.
Enabled
Enabled
Debugging messages