System Management Commands - SMC Networks 8624T - annexe 1 Management Manual

C L
OMMAND INE
Example
Console(config)#boot system config: startup
Console(config)#
Related Commands
dir
whichboot

System Management Commands

These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Command
Device Description Command
hostname
User Access Commands
enable password
Jumbo Frame Command
jumbo frame
Web Server Commands
ip http port
ip http server
Event Logging Commands
logging on
logging history
3-24
I
NTERFACE
Function
Specifies or modifies the host name for the
device
Sets a password to control access to various
privilege levels
Allows jumbo frames to pass through the
switch
Specifies the port to be used by the Web
browser interface
Allows the switch to be monitored or
configured from a browser
Controls logging of error messages
Limits syslog messages sent to the SNMP
network management station based on
severity
Mode Page
GC 3-25
GC 3-27
GC 3-28
GC 3-29
GC 3-30
GC 3-30
GC 3-31