Table of Contents
Advertisement
Port Priority Configuration
The default priority for all ingress ports is zero. Therefore, any
inbound frames that do not have priority tags will be placed in the
low priority output queue. Default priority is only used to
determine the output queue for the current port; no priority tag is
actually added to the frame. You can use the 802.1P Port Priority
Configuration menu to adjust default priority for any port as
shown below:
SMC TigerSwitch 1000 Local Management -- SMC8606T
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Port
Default Ingress
User Priority
Number of Egress
Traffic Classes
< 802.1P Port Priority Configuration >
Port
Default Ingress
User Priority
-----------------------------------------------
1
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
<OK>
Description
Numeric identifier for switch port.
Default priority can be set to any value from 0~7,
where 0~3 specifies the low priority queue and
4~7 specifies the high priority queue.
Indicates that this switch supports two priority
output queues.
C
ONSOLE
Number of Egress
Traffic Class
2
2
2
2
2
2
2
2
<CANCEL>
I
NTERFACE
2-55
Advertisement
Table of Contents
