Banner Configure Equipment-Location - SMC Networks 6128PL2 - annexe 2 Management Manual

4
Command Line Interface
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
equipment-info command interprets spaces as data input boundaries. The
use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where whitespace is necessary for clarity.
Example
Console(config)#banner configure equipment-info manufacturer-id
2852ACME-PoE floor 3 row 10 rack 15 shelf-rack 12 manufacturer
Acme_Corporation
Console(config)#

banner configure equipment-location

This command allows the administrator to configure the equipment location
information displayed in the banner. Use the no form to remove the equipment
location information from the banner display.
Syntax
banner configure equipment-location location
no banner configure equipment-location
location - The address location of the device.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
equipment-location command interprets spaces as data input boundaries.
The use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where whitespace is necessary for clarity.
Example
Console(config)#banner configure equipment-location
710_Network_Path,_Indianapolis
Console(config)#
4-32