Figure 3-47 Https Settings - SMC Networks 6128PL2 - annexe 2 Management Manual

When you have obtained these, place them on your TFTP server and transfer them
to the switch to replace the default (unrecognized) certificate with an authorized one.
Command Attributes
• TFTP Server IP Address – Specifies the IP address of the TFTP server which
contains the certificate file.
• Source Certificate File Name – Specifies the name of certificate file as stored on
the TFTP server.
• Source Private File Name – Specifies the name of the private key file as stored
on the TFTP server.
• Private Password – The password for the private key file.
Web – Click Security, HTTPS Settings. Fill in the TFTP server, certificate and private
file name details, then click Copy Certificate.
CLI – This example copies the certificate file from the designated TFTP server.
Console#copy tftp https-certificate
TFTP server ip address: <server ip-address>
Source certificate file name: <certificate file name>
Source private file name: <private key file name>
Private password: <password for private key>
Note:
The switch must be reset for the new certificate to be activated. To reset the
switch, See "Resetting the System" on page 3-34 or type:
AAA Authorization and Accounting

Figure 3-47 HTTPS Settings

4-84
Console#reload
3
3-73