Parking Light Bulbs - APRILIA SCARABEO 125 - PART 2 1999 Manual

Carefully read p. 57 (BULBS).
The headlight contains:
– One low/high beam bulb (1).
– One parking light bulb (2).
To change the bulbs, proceed as fol-
lows:
N
Unscrew and remove the screw (1).
NOTE
Upon reassembly, take care not
to invert the position of the screws (3) and
(4).
N
Unscrew and remove the screws (4).
N
Remove the frame (5).
N
Extract the parabolic reflector (6).
NOTE
Upon reassembly, install the par-
abolic reflector (6) correctly, making the in-
sertion seats coincide with the headlight
body.
58
use and maintenance Scarabeo 125 - Scarabeo 150
LOW/HIGH BEAM BULB
(HALOGEN BULB)
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
N
Grasp the bulb electric connector (7),
pull it and disconnect it from the bulb (1).
N
Rotate the bulb socket (8) anticlockwise
and extract it from the reflector.
N
Extract the bulb (1).
For the reassembly:
NOTE
Insert the bulb (1) in the reflector,
by making the two elements (9) on the bulb
coincide with the respective guides (10) on
the reflector.
N
Position the bulb socket (8) in the reflec-
tor and rotate it clockwise.
N
Connect the bulb electric connector (7).

PARKING LIGHT BULBS

CAUTION
To extract the bulb socket, do not pull
its electric wires.
N
Grasp the bulb socket (11), pull it and
take it out of its seat.
N
Extract the parking light bulb (2) and re-
place it with a new one of the same type.