Carefully read p. 57 (BULBS).
The rear light contains:
– A parking light/stoplight bulb (1).
– One number plate bulb (2).
To change them:
N
Unscrew the screws (3).
N
Remove the protection screen (4).
PARKING LIGHT/STOPLIGHT BULB
N
Slightly press the bulb (1) and rotate it
anticlockwise.
N
Remove the bulb from its seat.
NOTE
Insert the bulb in the socket, mak-
ing the two bulb pins coincide with the rele-
vant guides on the socket.
N
Correctly install a new bulb of the same
type.
N
Withdraw the bulb (2) and replace it with
a new one of the same type.
NOTE
Upon reassembly, correctly posi-
tion the protection screen in its seat.
CAUTION
Tighten the screws (5) carefully, without
exerting too much pressure, in order to
avoid damaging the protection screen.
use and maintenance Scarabeo 125 - Scarabeo 150
59