3
4
C H A N G I N G T H E T A I L L I G H T
BULBS
Carefully read page 49 (LAMPS).
The tail light accommodates:
√ two parking light/stoplight bulbs (1).
√ two turn indicators bulbs (2).
To change the bulbs:
Loosen the screws (4) and remove the tail
◆
light fairing (3).
Loosen the screws (6) and remove the
◆
tail light lens (5).
PARKING LIGHT/STOPLIGHT BULB
Press the bulb (1) slightly and rotate it
◆
anticlockwise.
Extract the bulb from its seat.
◆
CAUTION
Insert the bulb into
the bulb holder, so that the two pins slide
into the slots in the holder.
Fit a new bulb of equal rating.
◆
6
4
2
7
REAR TURN INDICATOR BULB
Remove the coloured shield (7), pay at-
◆
tention not to damage it.
Press the bulb slightly and rotate it anti-
◆
clockwise.
Extract the bulb from its seat.
◆
CAUTION
bling, correctly position the tail light seat
(3).
Tighten the screws (6) gradually. Do not
overtighten or the tail light lens (5) will
damage.
Tighten the screws (4) and refit the tail
◆
light fairing (3).
6
1
1
2
When
reassem-
CAUTION
9
5
8
7
NUMBER PLATE LIGHT BULB
Unscrew and remove the screw (8).
◆
Remove the number plate light mount
◆
(9).
Remove the bulb (10) and fit a new bulb
◆
of equal rating.
use and maintenance SportCity 125 - 200
10
51