APRILIA SCARABEO 125 - PART 2 1999 Manual page 53

Carefully read p. 37 (MAINTENANCE).
WARNING
Risk of fire.
Keep fuel and other flammable sub-
stances away from the electrical com-
ponents.
CAUTION
Before changing a bulb, move the igni-
tion switch to position "
few minutes, so that the bulb cools
down.
Change the bulb wearing clean gloves
or using a clean and dry cloth.
Do not leave fingerprints on the bulb,
since these may cause its overheating
and consequent breakage.
If you touch the bulb with bare hands,
remove any fingerprint with alcohol, in
order to avoid any damage.
DO NOT FORCE THE ELECTRIC
CABLES.
NOTE
Before changing a bulb, check the
fuses, see p. 55 (CHANGING THE FUS-
ES).
" and wait a
Carefully read beside (BULBS).
To change the bulbs:
NOTE
The following information refers to
one direction indicator only, but is valid for
all of them.
N
Unscrew and remove the screw (1).
Proceed with care.
Do not damage the tangs and/or their
seats.
N
Remove the protection screen (2).
N
Remove the coloured screen (3).
CAUTION
N
Press the bulb (4) slightly and rotate it
anticlockwise.
NOTE
If the bulb socket (5) goes out of
its seat, reinsert it correctly, making the
bulb socket opening coincide with the
screw seat.
N
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
N
Correctly install a new bulb of the same
type.
For the reassembly:
NOTE
Upon reassembly, position the
coloured screen (3) and the protection
screen (2) correctly in their seats.
CAUTION
Tighten the screw (1) moderately and
with great care, in order to avoid dam-
aging the protection screen (2) and the
coloured screen (3).
use and maintenance Scarabeo 125 - Scarabeo 150
57