High Beam Bulbs; Parking Light Bulb - APRILIA SL MILLE - PART 3 1999 Manual

Carefully read p. 81 (BULBS).
The headlight contains:
– two high beam bulbs (1) (side).
– one parking light bulb (2) (lower).
– one low beam bulb (3) (lower).
To change the bulbs, proceed as fol-
lows:
N
Position the vehicle on the side stand, on
firm and level ground.
N
For the left and lower bulbs, turn the han-
dlebar completely leftwards and work on
the rear left side of the front part of the
fairing.
N
For the right bulb, turn the handlebar
completely rightwards and work on the
rear right side of the front part of the fair-
ing.
82
use and maintenance SL mille

HIGH BEAM BULBS

CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
N
Grasp the electric connector of the bulb
to be replaced (4), pull it and disconnect
it from the bulb (1).
N
Move the protection element (5) of the
bulb to be changed with your hands.
N
Release the check spring (6) positioned
at the rear of the bulb socket (7).
N
Extract the bulb (1) from its seat and re-
place it with a new one of the same type.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.

PARKING LIGHT BULB

CAUTION
To extract the bulb socket, do not pull
the electric wires.
N
Grasp the parking light bulb socket (8),
pull it and remove it from its seat.
N
Withdraw the bulb (9) and replace it with
one of the same type.