NOTE
CHECK THAT THE LIGHT BEAM IS
CORRECTLY POSITIONED HORIZON-
TALLY.
Front direction indicators
(04_23)
Place the vehicle on the stand.
Unscrew and remove the screw
(1)
Remove the lens (2).
Press carefully on the bulb (3)
and turn it counterclockwise.
Remove the bulb (3) from its
housing.
Install a bulb of the same type
correctly.
WARNING
IF THE PARABOLA (4) EXITS FROM
ITS HOUSING, REINSERT IT COR-
RECTLY.
04_23
Rear lights
IMPORTANT
FOR THE REMOVAL, CHECK, CLEAN-
ING AND REPLACEMENT OF THE
N.B.
VÉRIFIER QUE L'ORIENTATION HORI-
ZONTALE DU FAISCEAU LUMINEUX
EST CORRECTE.
Clignotants avant (04_23)
Positionner le véhicule sur la bé-
quille.
Dévisser et enlever la vis (1).
Déposer le verre (2).
Appuyer modérément sur l'am-
poule (3) et la tourner dans le
sens inverse des aiguilles d'une
montre.
Extraire l'ampoule (3) de son lo-
gement.
Installer correctement une am-
poule du même type.
AVERTISSEMENT
SI LA PARABOLE (4) SORT DE SON
LOGEMENT, LA RÉINSÉRER COR-
RECTEMENT.
Groupe optique arrière
ATTENTION
POUR RÉALISER LE DÉMONTAGE,
LA VÉRIFICATION ET LE REMPLACE-
201