General Ospf Commands - ZyXEL Communications ZYWALL USG CLI Reference Manual

Chapter 8 Routing Protocol
8.2.1 RIP Commands
This table lists the commands for RIP.
Table 43 router Commands: RIP
COMMAND
router rip
[no] network interface_name
[no] redistribute {static | ospf}
redistribute {static | ospf} metric
<0..16>
[no] version <1..2>
[no] passive-interface interface_name
[no] authentication mode {md5 | text}
[no] authentication string authkey
authentication key <1..255> key-string
authkey
no authentication key
[no] outonly-interface interface_name

8.2.2 General OSPF Commands

This table lists the commands for general OSPF configuration.
Table 44 router Commands: General OSPF Configuration
COMMAND
router ospf
[no] redistribute {static | rip}
[no] redistribute {static | rip} metric-
type <1..2> metric <0..16777214>
88
DESCRIPTION
Enters sub-command mode.
Enables RIP on the specified Ethernet interface.
The no command disables RIP on the specified
interface.
Enables redistribution of routing information
learned from the specified source. The
command disables redistribution from the specified
source.
Sets the metric when redistributing routing
information learned from the specified source.
Sets the default RIP version for all interfaces with
RIP enabled. If the interface RIP version is blank,
the interface uses the default version. This is not
available in the GUI. The no
default RIP version to 2.
Sets the direction to "In-Only" for the specified
interface. The command sets the direction to bi-
no
directional.
Sets the authentication mode for RIP. The
command sets the authentication mode to "none".
Sets the password for text authentication. The
command clears the password.
Sets the MD5 ID and password for MD5
authentication.
Clears the MD5 ID and password.
Sets the direction to "Out-Only" for the specified
interface. The no command sets the direction to
"BiDir".
DESCRIPTION
Enters sub-command mode.
Enables redistribution of routing information
learned from the specified non-OSPF source. The
no command disables redistribution from the
specified non-OSPF source.
Sets the metric for routing information learned from
the specified non-OSPF source. The
clears the metric.
ZyWALL (ZLD) CLI Reference Guide
no
command sets the
no
no
no command