Registration Commands - ZyXEL Communications ZYWALL USG CLI Reference Manual

4.2 Registration Commands

The following table identifies the values required for many of these commands. Other input
values are discussed with the corresponding commands.
Table 7 Input Values for General Registration Commands
LABEL
user_name
password
The following table describes the commands available for registration. You must use the
configure terminal
commands.
Table 8 Command Summary: Registration
COMMAND
device-register checkuser user_name
device-register username user_name password
password [e-mail user@domainname country-code
country_code]
service-register checkexpire
service-register service-type standard license-
key key_value
service-register service-type trial service
{content-filter|idp}
service-register service-type trial service all
{kav|zav}
service-register service-type trial service av
{kav|zav}
service-register service-type trial av-engine
{kav|zav}
show device-register status
show service-register status {all|content-
filter|idp|sslvpn|av}
4.2.1 Command Examples
The following commands allow you to register your device with an existing account or create
a new account and register the device at one time, and activate a trial service subscription.
Router# configure terminal
Router(config)# device-register username alexctsui password 123456
Router(config)# service-register service-type trial service content-filter
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
The user name of your myZyXEL.com account. You may use six to 20
alphanumeric characters (and the underscore). Spaces are not allowed.
The password for the myZyXEL.com account. You may use six to 20
alphanumeric characters (and the underscore). Spaces are not allowed.
command to enter the configuration mode before you can use these
Chapter 4 Registration
DESCRIPTION
Checks if the user name exists in the
myZyXEL.com database.
Registers the device with an existing account or
creates a new account and registers the device at
one time.
country_code: see Table 9 on page 38
Gets information of all service subscriptions from
myZyXEL.com and updates the status table.
Activates a standard service subscription with the
license key.
Activates the content filter or IDP trial service
subscription.
Activates all of the trial service subscriptions,
including Kaspersky or ZyXEL anti-virus.
Activates a Kaspersky or ZyXEL anti-virus trial
service subscription.
Changes from one anti-virus engine to the other.
Displays whether the device is registered and
account information.
Displays service license information.
37