System Log Commands - ZyXEL Communications ZYWALL USG CLI Reference Manual

Zld-based
Table of Contents

Advertisement

Chapter 36 Logs

36.1.2 System Log Commands

This table lists the commands for the system log settings.
Table 168 logging Commands: System Log Settings
COMMAND
show logging status system-log
logging system-log category module_name
{disable | level normal | level all}
[no] logging system-log suppression interval
<10..600>
[no] logging system-log suppression
[no] connectivity-check continuous-log
activate
show connectivity-check continuous-log status
clear logging system-log buffer
36.1.2.1 System Log Command Examples
The following command displays the current status of the system log.
Router# configure terminal
Router(config)# show logging status system-log
512 events logged
suppression active
suppression interval: 10
category settings
content-filter
blocked-web-sites : normal , user
myZyXEL.com
idp
ike
firewall
policy-route
system
device-ha
nat
interface
account
force-auth
anti-virus
black-list
cnm
file-manage
adp
292
DESCRIPTION
Displays the current settings for the system log.
Specifies what kind of information, if any, is logged
in the system log and debugging log for the
specified category.
Sets the log consolidation interval for the system
log. The
Enables log consolidation in the system log. The
no
system log.
Has the ZyWALL generate a log for each
connectivity check. The no command has the
ZyWALL only log the first connectivity check.
Displays whether or not the ZyWALL generates a
log for each connectivity check.
Clears the system log.
: yes
:
: normal , forward-web-sites : no
: normal , zysh
: normal , app-patrol
: normal , ipsec
: normal , sessions-limit
: normal , built-in-service
: normal , connectivity-check: normal ,
: normal , routing-protocol
: normal , pki
: normal , interface-statistics: no
: normal , port-grouping
: normal , l2tp-over-ipsec
: normal , white-list
: normal , ssl-vpn
: normal , traffic-log
: normal , dial-in
: normal , default
command sets the interval to ten.
no
command disables log consolidation in the
,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: normal ,
: no
,
: normal ,
: all
,
ZyWALL (ZLD) CLI Reference Guide
,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents