ZyWALL SSL 10 Support Notes
Note: To use two-factor authentication, it's required to create a "group", rather than to
create a "user".
1). Go to GUI > User/Group > Group, create a group by clicking the add icon.
2). In this example, we create the group "testzywall" and choose the member from the AAA
server as following figure. Click OK.
Step2. Create a File Sharing
1). Go to GUI > Object > SSL Application, create one application rule by clicking the add
icon.
2). Choose type with File_Sharing and fill out the FTP server's IP address as following. Fill
out the file server information as following. Click OK then.
87
All contents copyright (c) 2006 ZyXEL Communications Corporation.